Batribike GRANITE Spécifications télécharger pdf (Page 24)

After 3,000 miles (5,000 km) (or YEARLY)

● Hub motor and general inspection

We recommend you arrange to have a thorough inspection of

your bicycle by a BATRIBIKE dealer. This includes opening up

the hub motor to inspect and lubricate the gears.

Tyre Pressures

The tyres should be pumped up to within the range stated on the sidewall.

This should be regularly checked as running with the correct pressures

will ensure maximum range from the battery.

Repairing a punctured tyre

If you have a punctured tyre, we recommend that you get a specialist to carry

out the repairs. You can always of course consult a specialist and carry out the

repairs on your own if you are confident that you have the necessary skills.

As there are no electronic components on the front wheel, its removal follows

standard procedures as with normal bicycles.

Removing the Rear Wheel

If you need to remove the rear wheel, for

example, to replace the rear tyre, then the

motor can be unplugged to aid disassembly.

The plug is located on the lower rear arm of

the frame as shown, (Left).

Take care when re-assembling the plug to

ensure that the two arrows are aligned

correctly.

Remember to ensure that the cable is

suitably secured to the bicycle frame

upon re-assembly.

Be mindful of the tightening assembly sequence of washers, nuts and spacers.

MOTOR

PLUG

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Pas de commentaire

Batribike GRANITE Spécifications Page 24